iPECS eMG80 - System Networking

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
238
connected including periods when the call is on hold, in queue, etc.
3. To enable Call Cost Display, the “SMDR Cost per Unit Pulse” and “SMDR Decimal”
must be assigned. When not assigned, the call duration is provided by the system.
Programming
Keyset Admin.
CO/IP
Metering Unit (PGM 142-Button 3)
SYSTEM
SMDR Cost per Unit Pulse (PGM 177-Button 10)
SMDR Decimal Location (PGM 177-Button 11)
SMDR Start Timer (PGM 177-Button 12)
Elapsed Call Timer (PGM 180-Button 19)
CO LINE DATA
Web Admin.
Analog Attributes

SMDR Metering Unit
SYSTEM DATA SMDR Attributes SMDR Cost Per Metering Pulse, SMDR
Decimal Location, Start Timer
System Timers

Elapsed Call Timer
Related Features
 SMDR (Station Message Detail Recording)
 Lost Call Recording
 Traffic Analysis
 Outside Call Warning Tone Timer
Hardware
 RS-232 device to capture SMDR