iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
242
The SMDR record output for internal calls is as shown in the figure and explained in the chart
below.
---- Site Name : --------------------------------------------------------------------------------------
100 E101 1) Station 100 called station 101 and station 101 answered.
2) In a conference, station 100 was a conference master, station 101 was a
Station 105 sent an internal SMS to station 103.
Station 110 was the member of conference room 1.
Station 120 paged station 123.
Operation
System
System Attendant
For real-time SMDR, records are output after completion of the call as shown in the above
1. Press the [TRANS/PGM] button.
To print SMDR records
2. Dial “0111”, the SMDR print code.
3. Enter the desired station range.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To delete stored records
2. Dial “0112”, the SMDR delete code.
3. Enter the desired station range.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To abort SMDR printing
2. Dial “0114”, the SMDR abort code.
3. Press the [HOLD/SAVE] button.
To Next Page
Loading...
