iPECS eMG80 - CO Line Release Guard Time

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
314
“5” => FS: Feature server
“6” => MS: SMS message wait
3. Press the [VOL UP]/[VOL DOWN] button to scroll through the Station Messages.
MSG : 100
1. Press the [HOLD/SAVE] button.
To return a call for the current Station Message
1. Press the “*” button, the list is updated removing the message from the list.
To delete the first Message Wait from the list
1. Press the [SPEED] button.
To delete all waiting Messages
2. Press the “*” button twice.
SLT
1. Momentarily press the hook switch.
To leave a Message Wait, while receiving ring back tone or no response on a call announce
2. Dial “*556”, Activate Message Wait/Call Back code.
3. Hang up, Message Wait is activated.
1. Momentarily press the hook switch.
To leave a Message Wait, while receiving DND tone
2. Dial “*556”, Activate Message Wait/Call Back code.
3. Hang up, Message Wait activated.
1. Dial “*557”, Message Wait/Call Back Answer code.
To retrieve a Station Message Wait
1. Momentarily press the hook switch.
To leave a Call Back (queue for a station), while receiving busy
2. Dial “*556”, Activate Message Wait/Call Back code.
3. Hang up, Call Back is activated.
1. Lift the handset.
To respond to a Call back recall, when the busy station is available the system calls back
2. Previously busy station is called.
Conditions
1. A Message Wait/Call Back return call will always ring at the receiving station overriding
the Intercom signaling mode selected.
2. A station can leave only one callback request.
3. The [MESSAGE/CALL BACK] button LED will continue to flash until all Message Wait
and Call Back requests, including Voice Mails, have been serviced.