iPECS eMG80 - Outside Line Ring Assignment

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
343
end user. Calling Line Identification Restriction and Connected Line Identification Restriction may
be enabled in the system database or you may activate restrictions with a {CLIR} and {COLR}
Flex buttons.
Operation
System
iPECS IP & LDP Phones
Operation of this feature is automatic.
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “81” + [HOLD/SAVE]
To program {CLIR} button
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “82” + [HOLD/SAVE]
To program {COLR} button
1. Press the {CLIR} or {COLR} Flex button.
To activate CLIR or COLR, before placing or answering an ISDN call
Conditions
1. This feature may not be available in the specific ISDN service area or may be a
subscription service.
Programming
Keyset Admin.
STATION
CLIP LCD Display (PGM 114-Button 1)
COLP LCD Display (PGM 114-Button 2)
CO/IP
COLP Table Index (PGM 143-Button 1)
Type of Calling Number (PGM 143-Button 4)
ISDN/ICLID
CLIP Print to Serial Port (PGM 200-Button 2)
ISDN LINE
CLIP/COLP Table (PGM 201)
STATION DATA
Web Admin.
CLI Attributes

CLIP Display, COLP Display
CO LINE DATA CID/CPN Attributes  CLIP &COLP Table Index, Type of
Number for Calling Party Info
ISDN LINE DATA ISDN Attributes CLI Print to Serial
CLIP/COLP Table
Related Features
Hardware
 ISDN Line