iPECS eMG80 - Ring Tone Selection and Download

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
371
- Via one of above buttons according to priority.
4) Making of internal call.
- In idle state, if dial a station number by dial pad.
 One of DSS button or Unified-LOOP button is seized automatically for the
call.
- Seize DSS button and dial : the DSS button is seized.
- Seize Unified-LOOP button and dial.
 If there is DSS button, the DSS button is seized.
Or, the pressed Unified-LOOP button is seized.
5) Making of internal call.
- In idle state, if dial CO-access-code and external number by dial pad.
 One of CO-Individual/CO-Group/CO-LOOP/Unified-LOOP button is seized
automatically for the call.
- Seize CO-Individual/CO-Group/CO-LOOP button and dial : the CO-
Individual/CO-Group/CO-LOOP button is seized.
- Seize Unified-LOOP button and dial.
 If there is CO-Individual/CO-Group/CO-LOOP button, the CO-
Individual/CO-Group/CO-LOOP button is seized.
Or, the pressed Unified-LOOP button is seized.
6) Auto-hold and auto-transfer are implemented also using previous DSS/CO-
Individual/CO-Group/CO-LOOP/MSN-LOOP buttons.
- On internal/external talking state, the call is transferred to the right-next call of
making by pressing of CO-Individual/CO-Group/CO-LOOP/MSN-
LOOP/Unified-LOOP
Programming
Keyset Admin.
STATION
Call Wait (PGM 113-Button 9)
CO/IP LINE
ICLID Timer (PGM 142-Button 14)
SYSTEM
DID/DISA Destination (PGM 167)
DID/DISA No Answer Timer (PGM 181-Button 2)
STATION DATA
Web Admin.
CLI Attributes

Call Wait
CO LINE DATA
Analog Attributes

ICLID Ring Timer
SYSTEM DATA DID/DISA Destination
System Timers

DID/DISA No Answer Timer
Related Features
 Direct Inward System Access (DISA)
 Direct Inward Dial (DID)
 ICLID Call Routing
 Intercom (ICM) Call
Hardware
 iPECS IP or LDP Phone