iPECS eMG80 - Attendant Call & Call Queuing

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
394
10. Press the [HOLD/SAVE] button to store the scenario.
1. Lift the handset or press the [SPEAKER] button to receive a dial tone.
To activate ICR Call Forward
2. Press the [FWD] button.
3. Dial the desired Call Forward code (0-4).
4. Dial “587”, the Station ICR code.
5. Replace the handset, return to idle.
Conditions
1. Any station allowed access may define scenarios in the station’s Web portal.
2. The conditions as listed under Call Forward apply.
Programming
Keyset Admin.
STATION
Call Forward (PGM 111-Button 2)
Station Call Forward No Answer Timer (PGM 123-Button 1)
SYSTEM
System Call Forward No Answer Timer (PGM 181-Button 1)
STATION DATA
Web Admin.
Common AttributesCall Forward
Station Timer

Station Call Forward No Answer Timer
SYSTEM DATA
System Timers

Call Forward No Answer Timer
Related Features
 Call Forward
Hardware
 iPECS IP or LDP Phone