iPECS eMG80 - Page 411

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
398
[3] BGM
[4] REGISTER STA NAME
[5] DISP PHONE IP ADDR
[6] CHANGE PHONE IP ADDR
[7] DISPLAY MAC ADDR
[8] NETWORK CONFIG
[9] DISP PHONE VERSION
[*] DISP ADD-ON PACKAGE
 Under selection [*] SYSTEM, access Admin
[#] ENTER ADMIN
[6] SET FORCED FWD DEST
[7] FORCED FWD TO DEST
[8] REGISTER BLUETOOTH
[*] HOTDESK LOGOUT
[#] ENTER ADMIN
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button, the Station User Program Menu is displayed.
To assign a Station User Program Code to a Flex button
2. Press the desired Flex button.
3. Dial the desired Station User Program Code and additional inputs that may be required.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button, the Station User Program Menu is displayed.
To activate a Station User Program Code feature or function
2. If desired, use the [VOL UP]/[VOL DOWN] to display the desired menu item, or dial the
desired Station User Program Code with additional inputs as required.
Programming
[9] BLUETOOTH USAGE
[0] HOTDESK LOGIN