iPECS eMG80 - Feature Cancel

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
413
Operation
Attendant
1. Press the [TRANS/PGM] button, the Station Program Menu is displayed.
To activate an Attendant Station User Program Code feature or function
2. Dial “0” to access the Attendant Station Program codes.
3. Enter desired code or use the [VOL UP]/[VOL DWN] button to display the desired menu
item and enter the desired code.
4. Dial additional inputs, if required.
Condition
Programming
Keyset Admin.
SYSTEM
System Attendant (PGM 164-Button 1)
Main Attendants Assignment (PGM 164-Button 2~4)
SYSTEM DATA
Web Admin.
Attendant Assignment System Attendant, Main Attendant
Related Features
 SMDR (Station Message Detail Recording)
 Traffic Analysis
 Temporary Station COS (Class of Service)/Lock
 Authorization Codes (Password)
 System Clock Set
 Pre-defined & Custom Text Display Messages
 Integrated Auto Attendant/Voice Mail
 Dial-by-Name
 Auto Service Mode Control
 Back Ground Music
 Station User Programming & Codes
Hardware
 iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended