iPECS eMG80 - Page 453

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
440
Station ICR
Station & System Speed Dial
Universal Night Answer
Walking COS (Class of Service)
Wake-Up Alarm
Operation
SIP Phone
System
SIP phone operation generally follows the SLT procedures. Refer to the SIP phone user guide
for operation of features of the phone.
Ericsson-LG Enterprise SIP phone
Operation of SIP phone provisioning is automatic when configured.
1. Press the [Call Forward] button.
To activate One-Time Call Forward while receiving ring with Feature Sync active
2. Dial destination number, ringing stops and the call Forwards.
1. Press the [DND] button, the ringing call is rejected.
To activate One-Time DND while receiving ring with Feature Sync active
Conditions
1. A lock-key (License) is required to use a 3
rd
party SIP phone, contact your local
Ericsson-LG Enterprise representative.
2. SIP phones must be configured in accordance with the manufacturer’s instruction and
have an appearance of the station assigned in the system.
3. When using Feature Sync, the Station must be allowed Call Forward and DND for
proper operation.
4. In addition to the feature set supported for 3
rd
party SIP phones, the Ericsson-LG
Enterprise SIP phones support Voice Over, Intrusion, Forced Hands-free ICM.
5. SIP phones provide for an End-of-dialing entry much like a mobile phone. Generally a
Send or the ‘#’ button is employed at the end of dialing so there is no delay in sending
digits.
6. With most SIP phones, a second Station appearance can be assigned to a button. In
this case, a virtual MAC is used in the system configuration.
7. Ericsson-LG Enterprise and most 3
rd
party SIP phones support 3-party conference
through a built-in mixer. For operation refer to the SIP phone user guide. When not
supported by the SIP phone, the phone will have access to the Conference Room and
Group features for conferencing.
8. Ericsson-LG Enterprise takes no responsibility of the compatibility of any 3
rd
party SIP
phone with the system and any XX party SIP phone with the system. It is the user’s
responsibility to assure compatible operation.