iPECS eMG80 - Page 93

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
80
conference.
In case of eMG, a maximum of 13 parties can join a Conference Room and two such conferences
can be active simultaneously.
In case of UCP, up to nine (9) Conference Rooms can be set-up and up to 32 parties with the
g.711 or g.729 codec, or 24 parties with the g.722 or g.723 codec can be join a Conference
Room. Conference Rooms employ channels from an MCIM (Multi-party Conference Interface
Module) or the MCIU built-in the iPECS UCP100 and UCP600.
A system Attendant can view the list of participants in an active Conference Room and close any
Conference Room.
Operation
Attendant Phone
1. Press the [TRANS/PGM] button.
To view Room participant list
2. Dial “054”.
3. Dial Room number (“1”~”9”).
1. Press the [TRANS/PGM] button.
To delete a Conference Room
2. Dial “055”.
3. Dial Room number (“1”~”9”).
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To open a Conference Room
2. Dial “53” to create a Conference Room.
3. Dial the desired Conference Room number (“1”~”9”).
4. If desired, enter a password (exactly 5 digits) for the Conference Room.
5. Press [HOLD/SAVE] button to open the Room.
1. Lift the handset or press the [SPEAKER] button.
To join a Conference Room
2. Dial “59”, the Conference Room entry code.
3. Dial the Conference Room Number.
4. Dial the Conference Room password, if required.
1. Press the [TRANS/PGM] button.
To close a Conference Room
2. Dial “54”, the close Conference Room code.
3. Dial the Conference Room number (1~9).
4. Dial the Conference Room password.
5. Press [HOLD/SAVE] to delete the Conference Room.