Kentrox RMX-3200 - Page 112

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring a Wireless Network with Remote RMX-3200: Getting Started
11-4
4. (optional) If management network access is not available, then the technician
must:
 Access the SCD client from a location that has network access.
 Add the Remote RMX-3200 to be installed
 Generate a new token
 Save the token as a file on the laptop
 Use a local Ethernet connection to the Remote RMX-3200 bridge to transfer
the token via FTP/SFTP to file
/config/openvpn/bundle/bundle.cfg on
the Remote RMX-3200
5. Verify that Remote RMX-3200 is connected to the management network.