Kentrox RMX-3200 - Rtrv-Hdr

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-11
RTRV-HDR
Description
This command causes Remote RMX-3200 to send its TL1 System Identifier (SID)
header to the OSS. The SID is used primarily to check the status of the
communications link.
Format
RTRV-HDR:tid::ctag;
Parameters
Examples
This example displays a normal response when command RTRV-HDR:Remote::1; is
entered.
tid
Defines the target identifier for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to commands. Each
command has a unique correlation tag. A response includes the identical
correlation tag to the one used for the corresponding command.
IP 1
<
Remote RMX 09-01-25 15:18:17
M 1 COMPLD
/* RTRV-HDR:Remote::1 */
;