Kentrox RMX-3200 - Rtrv-Alm-T1

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-10
Examples
This example displays a normal response when command
RTRV-ALM-OC3:Remote::1; is entered.
RTRV-ALM-T1
Description
This command causes Remote RMX-3200 to return all alarms designated with the T1
modifier during Remote RMX-3200 configuration. Points associated with class T1,
which is a digital transmission link with a capacity of 1.544 Mbps, are generally
programmed with this modifier.
Format
RTRV-ALM-T1:tid:[ aid ]::ctag;
Parameters
Examples
This example displays a normal response when command
RTRV-ALM-T1:Remote::1; is entered.
Remote RMX 09-01-18 13:16:00
M 1 COMPLD
/* RTRV-ALM-OC3:Remote::1:: */
"INPUT0_3,OC3:CR,MISC,NSA,09-18,13-15-29,,,:\"INPUT 0/3 CLOSE\",:,"
;
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to commands. Each
command has a unique correlation tag. A response includes the identical
correlation tag to the one used for the corresponding command.
Remote RMX 09-01-18 13:30:34
M 1 COMPLD
/* RTRV-ALM-T1:Remote::1:: */
"INPUT0_5,T1:CR,MISC,NSA,09-18,13-30-14,,,:\"INPUT 0/5 CLOSE\",:,"
;