Kentrox RMX-3200 - Action Components

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Actions, Events and Responses: Action Components
12-6
Action Components
Figure 12-4 illustrates a sample action configuration:
Figure 12-4 Example of the Action Command
Action declarations consist of the following elements:
 An action name, which is a user-defined name for the action.
 An event name, which is a previously user-defined name of an event.
 The response name, which is a previously user-defined name of a response.

Note: For more information about this command, refer to the Remote RMX-3200
Command Reference Guide.
action name
event name
response name
config action MyAction event MyEvent response MyResponse