Kentrox RMX-3200 - Configuring a Mediation SNMP NE Template

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the SNMP Proxy: Configuring a Mediation SNMP NE Template
22-9
Configuring a Mediation SNMP NE Template
To configure a mediation SNMP NE template:
1. Configure the NE template name
Template1:
config mediation snmp ne-template Template1
2. (optional) Configure a description for Template1 called Sample template:
config mediation snmp ne-template Template1 description Sample
template
3. Configure point modem with the following settings:
 point template ifEntryDef
 parameter ifDesc
 value serial_modem
config mediation snmp ne-template Template1 point modem ifEntryDef
ifDesc serial_modem
4. Configure event runningConfigChange with the following settings:
 event template (existing) configChangeDef
 parameter file
 value running-config
config mediation snmp ne-template Template1 event
runningConfigChange configChangeDef file running-config
In this scenario, you will configure a mediation SNMP NE template, which is a
template containing device model definitions for a proxied SNMP network element.
For this template, you will configure the:
 template name Template1
 description
 point, which refers to an existing point template and associated values
 event, which refers to an the existing event template and associated values
 NE template, which refers to the existing NE template and an associated value.