Kentrox RMX-3200 - Changing a User Password

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Users in the CLI: Changing a User Password
3-4
Changing a User Password
To change a user password:
1. At the main prompt, change the password for user
johndoe to oldguy:
config users password johndoe
The following message displays:
Please enter the new password.
2. Enter the new password:
oldguy

Note: Passwords are case-sensitive and display as asterisks (*) on the screen
as you type them.
The following message displays:
Please confirm the new password.
3. Re-enter the new password.
oldguy

Note: Passwords always display in an encrypted format within the system.
There is no way to verify that the user password has been changed.
4. Save the configuration.
In this scenario, you will change the password for an existing user.