Kentrox RMX-3200 - Saving the Running Configuration

Remote RMX-3200 Version 5.2x Configuration Guide
Saving and Applying Configurations: Saving the Running Configuration
4-2
Saving the Running Configuration
To save the configuration, copy the running configuration to the startup configuration:
copy running-config startup-config
You can also save the running configuration from the Remote Web interface as
follows:
1. Click the Configuration button on the left side of the screen or Configuration
from the Main Menu.
2. In the Save section of the screen, click one of the three options and make the
appropriate selection or entry as required.
3. Click the Save link. The screen refreshes and confirms your selection.
See
Accessing the Web Interface on page 2-9 for details.
In this scenario, you will save the
running configuration.

Note: You should save the configuration each time you make a change that you
want to keep. If you reset Remote RMX-3200 without first saving the
configuration, any unsaved changes will be lost.