Kentrox RMX-3200 - Rtrv-Alm-Env; Rtrv-Alm-Eqpt

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-8
RTRV-ALM-ENV
Description
This command causes Remote RMX-3200 to return all alarms for points designated
with environment modifiers during Remote RMX-3200 configuration. Points
associated with environmental alarms, such as high temperature, are generally
programmed with this modifier.
Format
RTRV-ALM-ENV:tid:[ aid ]::ctag;
Parameters
Examples
This example displays a normal response when command
RTRV-ALM-ENV:Remote::1; is entered.
RTRV-ALM-EQPT
Description
This command causes Remote RMX-3200 to return all alarms for points designated
with equipment modifiers during Remote RMX-3200 configuration. Points associated
with equipment alarms, such as link down, are generally programmed with this
modifier.
Format
RTRV-ALM-EQPT:tid:[ aid ]::ctag;
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to commands. Each
command has a unique correlation tag. A response includes the identical
correlation tag to the one used for the corresponding command.
Remote RMX 09-01-25 12:19:02
M 1 COMPLD
/* RTRV-ALM-ENV:Remote::1 */
"INPUT0_19:CR,MISC,09-27,09-48-45,\"INPUT 0/19 CLOSE\""
;