Remote RMX-3200 Version 5.2x Configuration Guide
:
Glossary-2
alarm class
An alarm class is a designation of a TL1 alarm as environmental or
equipment-related. TL1 alarms designated as environmental signal the occurrence of
events such as temperature or pressure changes. TL1 alarms designated as
equipment-related signal the occurrence of events such as device failures or
malfunctions.
alarm code
The alarm code identifies the severity of an automatic alarm message based on a
condition. The alarm conditions are critical (CR), major (MJ), minor (MN), and
nonalarmed (NA).
alarm message
The alarm message is the text displayed for a TL1 alarm when a specified
environmental event occurs.
alarm type
The alarm type is the value for TL1 environmental alarm response. For valid alarm
type values, refer to the Bellcore GR-833-CORE documentation.
analog reporting interval
The analog reporting interval is the rate at which events are generated for an analog
input.
analog input
Analog inputs monitor input current and support five different events that represent
input current transitions.
application mode
The application mode sets up a serial controller as a destination for internal
connections or gives the controller the ability to initiate internal connections when a
system event occurs.
To Next Page
Loading...
