Kentrox RMX-3200 - Without Kentrox Kickstart

Remote RMX-3200 Version 5.2x Configuration Guide
Getting Started: Accessing the CLI Using a Local Connection
2-3
5. At the login prompt, enter your user name:
admin
6. At the password prompt, enter your password:
password

Notes: Passwords are case-sensitive.
 admin is the default user name and password is the default password.
Remote RMX-3200 allows you to log in only five times using the default
password. On your sixth login, Remote RMX-3200 will prompt you to
change the default password to a new password.
The main CLI prompt displays.
7. (optional) Access help information:
help
or
?

Note: For more information on using the CLI, refer to section “CLI Overview” in the
Remote RMX-3200 Command Reference Guide.
Without Kentrox Kickstart
To access the CLI using a local connection (without Kickstart):
1. Use a PC or laptop with terminal emulation software such as HyperTerminal or
Procomm to connect to Remote RMX-3200. For information on operating your
particular terminal emulation software, refer to the documentation provided with
the program.
2. Set up your terminal emulation software to connect using COM port 1 (COM1).
_ __ _____ _ _ _______ _____ ____ __ __
| | / / | ___|| \ | ||___ ___|| _ \ / \ \ \ / /
| |/ / | |___ | \ \| | | | | (_) || -- | \ \/ /
| ( | ___|| |\ \ | | | | _ / | ( ) | ) (
| |\ \ | |___ | | \ | | | | | \ \ | -- | / /\ \
|_| \_\ |_____||_| \_| |_| |_| \_\ \____/ /_/ \_\
Remote
login: admin
Password:
You have 4 grace logins remaining using the default user password.
(Kentrox)>