Remote RMX-3200 Version 5.2x Configuration Guide
Getting Started: Accessing the CLI Using a Local Connection
2-4
3. Configure COM port 1 with the following parameters:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
4. From within your terminal emulation software, press ENTER to request a login
prompt.
5. At the login prompt, enter your user name:
admin
6. At the password prompt, enter your password:
password
Notes: Passwords are case-sensitive.
admin is the default user name and password is the default password.
Remote RMX-3200 allows you to log in only five times using the default
password. On your sixth login, Remote RMX-3200 will prompt you to
change the default password to a new password.
The main CLI prompt displays.
7. (optional) Access help information:
help
or
?
Note: For more information on using the CLI, refer to section CLI Overview in the
Remote RMX-3200 Command Reference Guide.
_ __ _____ _ _ _______ _____ ____ __ __
| | / / | ___|| \ | ||___ ___|| _ \ / \ \ \ / /
| |/ / | |___ | \ \| | | | | (_) || -- | \ \/ /
| ( | ___|| |\ \ | | | | _ / | ( ) | ) (
| |\ \ | |___ | | \ | | | | | \ \ | -- | / /\ \
|_| \_\ |_____||_| \_| |_| |_| \_\ \____/ /_/ \_\
Remote RMX
login: admin
Password:
You have 4 grace logins remaining using the default user password.
(Kentrox)>
To Next Page
Loading...
