Kentrox RMX-3200 - Event Components

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Actions, Events and Responses: Event Components
12-4
Event Components
Figure 12-2 illustrates a sample event configuration:
Figure 12-2 Example of the Event Command
Event declarations consist of the following elements:
 An event name, which is a user-defined name for the event.
 An event originator, which is a system component that generates the event.
 An event type, which is a system occurrence that signifies the event. Options for
the event type vary based on the event originator.

Note: For more information about event configuration commands and parameters,
refer to the Remote RMX-3200 Command Reference Guide.
event name
originator
event type
config event MyEvent content input 0/1 close