Kentrox RMX-3200 - Unsupported TL1 Commands

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Unsupported TL1 Commands
28-12
Unsupported TL1 Commands
Remote RMX-3200 TL1 VNE’s only take action when default or configured TL1
commands are entered. A failure message occurs when an invalid command is
entered, which causes Remote RMX-3200 to give a deny response. Responses
include a ctag that is identical to the invalid command.
Example
This example displays the failure message that occurs when unsupported command
REPT-ALM-ENV:Remote:ALL:1; is entered.
Remote RMX 09-01-26 12:01:37
M 1 DENY
ICNV
/* Input, Command Not Valid */
/* The command code entered is not a valid command code. */
;