Kentrox RMX-3200 - Rtrv-Alm-Ec1

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-7
Examples
This example displays a normal response when command
RTRV-ALM-DS3:Remote::1::; is entered.
RTRV-ALM-EC1
Description
This command causes Remote RMX-3200 to return all alarms designated with the
EC1 modifier during Remote RMX-3200 configuration. Points associated with class
EC1, which is a facility with electrical levels at 51.84 Mbps, are generally programmed
with this modifier.
Format
RTRV-ALM-EC1:tid:[ aid ]:ctag::;
Parameters
Examples
This example displays a normal response when command
RTRV-ALM-EC1:Remote::1::; is entered.
Remote RMX 09-01-18 12:46:19
M 1 COMPLD
/* RTRV-ALM-DS3:Remote::1:: */
"INPUT0_1,DS3:CR,MISC,NSA,09-18,12-36-34,,,:\"INPUT 0/1 CLOSE\",:,"
;
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to input commands.
Each input command has a unique correlation tag. A response includes the
identical correlation tag to the one used for the corresponding input
command.
Remote RMX 09-01-18 13:08:18
M 1 COMPLD
/* RTRV-ALM-EC1:Remote::1:: */
"INPUT0_2,EC1:CR,MISC,NSA,09-18,13-07-17,,,:\"INPUT 0/2 CLOSE\",:,"
;