Kentrox RMX-3200 - Alw-Msg-All

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-4
Examples
This example displays a normal response when command ACT-
USER:Remote:ai:1::ai; is entered.
ALW-MSG-ALL
Description
This command causes Remote RMX-3200 to resume transmission of automatic
messages after being in the inhibit message mode.

Note: Remote RMX-3200 does not currently support the inhibit message TL1
command. Because of this, Remote RMX-3200 is always in ALW-MSG-ALL
mode.
Format
ALW-MSG-ALL:tid:[ aid ]:ctag;
Parameters
Examples
This example displays a normal response when command ALW-MSG-
ALL:Remote:AID:1; is entered.
Remote RMX 09-01-24 16:58:44
M 1 COMPLD
/* 1 User(s) Logged On */
;
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
cta
g
Defines the correlation tag used to correlate responses to commands. Each
command has a unique correlation tag. A response includes the identical
correlation tag to the one used for the corresponding command.
Remote RMX 09-01-24 17:47:44
M 1 COMPLD
/* ALW-MSG-ALL:Remote:AID:1 */
;