Kentrox RMX-3200 - Response Components

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Actions, Events and Responses: Response Components
12-5
Response Components
Figure 12-3 illustrates a sample response configuration:
Figure 12-3 Example of the Response Command
Response declarations consist of the following elements:
 A response name, which is a user-defined name for the response.
 A responder, which is a system component that processes the response.
 A response type, which defines what the response does when the associated
event occurs. Options for the response type vary based on the responder.

Note: For more information about response configuration commands and
parameters, refer to the Remote RMX-3200 Command Reference Guide.
response name
responder
response type
config response MyResponse content output 0/3 close