Kentrox RMX-3200 - Restoring Factory Defaults

Remote RMX-3200 Version 5.2x Configuration Guide
Saving and Applying Configurations: Restoring Factory Defaults
4-4
Restoring Factory Defaults
Important: When you copy the factory configuration to the running configuration, all
configured settings are removed. You need a console port connection to
re-establish communications with Remote RMX-3200.
To restore the factory default settings, copy the factory configuration to the running
configuration:
copy factory-config running-config
In this scenario, you will restore Remote RMX-3200’s factory default settings.