Kentrox RMX-3200 - RMB-1 Peripheral Unit

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the Peripheral Management Subsystem: Peripheral Management Subsystem Overview
25-4
RMB-1 Peripheral Unit
The RMB-1 peripheral unit (refer to Figure 25-1) is powered via PoE from Remote
RMX-3200. RMB-1 contains the following inputs and outputs:
 Sixty-four digital bistate inputs
 Four relay outputs
 Four current inputs (4-20 mA)
 Four voltage inputs (0-10V, positive only)
 A four-terminal SiteBus
 Four sets of auxiliary terminals, which are not electrically connected to other
RMB-1 I/O terminals
 Built-in temperature and humidity sensors
Figure 25-2 RMB-1 Peripheral Unit