Remote RMX-3200 Version 5.2x Configuration Guide
:
Glossary-3
asynchronous
Asynchronous transmission (or async) refers to a simple protocol where the
transmitting device does not need to be synchronized with the receiving device. The
transmitter can send data when data is ready to be sent. Each character of this data
contains start and stop bits, which indicate the beginning and end of each character.
B
band
The band sets the high and low threshold values for analog input event generation.
banner
The banner is the initial text that appears when the user logs into Remote RMX-3200.
baud rate
The baud rate is the speed of a connection in bits per second.
bit-level encoding
Bit-level encoding is the method by which binary codes represent characters of data.
T1 lines have available linecode options Binary 8 Zeros Substitution (B8ZS) and
Alternate Mark Inversion (AMI). E1 lines have available linecode options High Density
Bipolar Three (HDB3) and Alternate Mark Inversion (AMI).
boolean
An expression whose value can be either true or false.
To Next Page
Loading...
