Kentrox RMX-3200 - Default TL1 VNE Commands; Act-User

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-3
Default TL1 VNE Commands
The default TL1 commands supported by Remote RMX-3200 are a small subset of all
available TL1 commands. The following default commands are supported:
 ACT-USER
 ALW-MSG-ALL
 CANC-USER
 RTRV-ALM-ALL
 RTRV-ALM-DS3
 RTRV-ALM-EC1
 RTRV-ALM-ENV
 RTRV-ALM-EQPT
 RTRV-ALM-OC3
 RTRV-ALM-T1
 RTRV-HDR
ACT-USER
Description
This command lets a remote user log into the VNE on Remote RMX-3200.
Format
ACT-USER:tid:user:ctag::password;
Parameters
tid
Defines the target identifier for a VNE on Remote RMX-3200.
user
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to commands.
Each command has a unique correlation tag. A response includes the
identical correlation tag to the one used for the corresponding
command.
password
Defines the user password for a VNE on Remote RMX-3200.