Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the Peripheral Management Subsystem: Expansion Peripheral States
25-11
Expansion Peripheral States
Every discovered peripheral has an “Admin state” and “Oper state” field. The values
associated with these states appear in the output for command
show peripherals.
The Administrative State is the configured state of the peripheral.
Table 25-1 lists the
potential administrative states.
The Operation State is the actual, operational state of a discovered peripheral.
Table
25-2 lists the potential operation states.
Table 25-1 Potential Expansion Peripheral Administrative States
Administrative
State
Description
Managed
Indicates that Remote RMX-3200 is ready to actively manage
the peripheral. This state goes into effect when the user issues
command
config peripheral manage for the specified
peripheral.
Unmanaged
Indicates that Remote RMX-3200 is not ready to actively
manage the peripheral.
Table 25-2 Potential Expansion Peripheral Operation States
Operation State Description
Unmanaged
Specifies that the peripheral has been discovered, but
has not been configured for management.
Note: The Administrative State will also be
Unmanaged.
OtherManaged
Specifies that the peripheral is under the management of
another Remote RMX-3200.
AdminManaged
Specifies that the peripheral has been configured under
the management of Remote RMX-3200, but has not
actively been managed.
Note: This state usually occurs when the expansion
peripheral is configured, but is not connected to
Remote RMX-3200.
Connecting
Specifies that Remote RMX-3200 is attempting to
establish a management connection to the peripheral.
To Next Page
Loading...
