Kentrox RMX-3200 - Configuring Modules Using Web Interface

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Modules: Configuring Modules Using Web Interface
24-10
Configuring Modules Using Web Interface
Installing Modules
To install a module:
1. Using an FTP/SFTP utility, transfer the
SYSTEM-1.6.7.mod and TOWER-
1.6.7.tgz module files from the local workstation to the modules directory on
Remote RMX-3200.

Note: Users might have different modules than the ones in this example
2. Using a browser, access the web interface and enter a valid usename and
password on the login page. From the main menu or from the navigation menu on
the left side of the screen, select the Modules link. The module home page will be
displayed See
Figure 24-1.
In this scenario, you will:
 Use an FTP/SFTP utility to transfer the module to the Remote RMX-3200
staging area
 Log into the web interface and navigate to the modules home page
 Install the module
 View the list of installed modules
 Enable an optional application