Kentrox RMX-3200 - T1 and E1 Overview

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Controllers and Interfaces: T1 and E1 Overview
7-2
T1 and E1 Overview
Remote RMX-3200 can support a single channel group (called group) of channelized
T1/E1 WAN links. The channel group includes any combination of timeslots 1 to 24 for
T1 applications and timeslots 1 to 31 for E1 applications. The user selects the
available timeslots. The T1/E1 WAN links can function as either routed or bridged
interfaces.
HDLC and PPP are the available encapsulation protocols. These are the mechanisms
for framing data across a serial port.

Notes: On DAC-equipped units, you cannot configure serial wan/2 independently
from
serial wan/1. You must configure them together in a drop and
continue network. For more information about DAC, refer to
Chapter 27:
Drop and Continue Functionality.
 BCP (bridging) is not available for HDLC encapsulation on Remote RMX-
3200. IPCP (static routing) is the only protocol available for HDLC
encapsulation on Remote RMX-3200.