Remote RMX-3200 Version 5.2x Configuration Guide
Saving and Applying Configurations: Restoring Basic Network Settings
4-5
Restoring Basic Network Settings
To restore the basic network settings, copy the network recovery file to the running
configuration:
copy network-recovery running-config
You can also restore the network settings from the Remote Web interface as follows:
1. Click the Configuration button on the left side of the screen or Configuration
from the Main Menu.
2. In the Restore section of the screen, click From backup file:, then select
network-recovery from the drop-down menu.
3. Click the Restore link. The screen refreshes and confirms your selection.
See
Accessing the Web Interface on page 2-9 for details.
In this scenario, you will restore Remote RMX-3200’s basic network settings. These
settings are entered in the initsetup wizard. The
running-config file is now
automatically saved to a
network-recovery file when the you run the initsetup
wizard and apply the output to the
running-config file. If the running configuration
is lost, users can save file
network-recovery to file running-config to restore
the initial system configuration.
Note: For more information on the initsetup wizard, refer to Using the initsetup
Wizard on page 26-3.
To Next Page
Loading...
