Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Modules: Configuring Modules Using Command Line Interface
24-3
Configuring Modules Using Command Line Interface
Installing Modules
To install a module:
1. Using an FTP/SFTP utility, transfer the
SYSTEM-1.6.7.mod and TOWER-
1.6.7.tgz module files from the local workstation to the modules directory on
Remote RMX-3200.
2. At the main CLI prompt, install all module files in the staging area:
exec site install
The command response similar to the following displays:
Note: In this example, TOWER-1.6.7.tgz is a module bundle which contains two
individual modules packaged together.
3. (optional) Verify that the module has been installed properly:
show site modules
The command response similar to the following displays:
Tip: To display module applications and details, enter show site modules {
modulename }
In this scenario, you will:
Use an FTP/SFTP utility to transfer the module to the Remote RMX-3200
staging area
Install the module
Show the installed modules
(Dub)>exec site install
The modules System and Tower were installed successfully.
(Dub)>
(Dub)>show site modules
Module Version Description Date
------------------------------------------------------------------------------
System 1.6.7 System 2013.07.11 18:54:03
Tower 1.6.7 Tower Management Applicat 2013.07.11 18:55:28
TowerTenants 1.6.7 Tower Management Live Vie 2013.07.11 18:55:28
To Next Page
Loading...
