Remote RMX-3200 Version 5.2x Configuration Guide
:
Glossary-19
network element set
An NE set provides a way to customize the number of instances of NEs of a particular
type based on what actual physical equipment is at a site as compared to the fixed
number of instances that are defined in the module. Once an NE set has been
configured with new instances, the NE will need to be realized, just as the module-
defined NEs must be realized.
notification code
The notification code provides an indication of the severity of a TL1 alarm.
NTP polling interval
The minimum and maximum NTP polling intervals indicate the timeframe each host
on a network has to connect to the NTP server to retrieve and transmit data.
NTP server
An NTP server maintains a common clock time among hosts within a network.
O
OID
OID (Object Identifier) points to a specific parameter in the SNMP agent.
offset
When configuring the timezone for Remote RMX-3200, offset is the number of hours
and minutes difference between the desired time zone and the default time zone,
which is standard GMT +0.00.
To Next Page
Loading...
