Kentrox RMX-3200 - Rtrv-Alm-Ds3

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-6
Parameters
Examples
This example displays a normal response when command
RTRV-ALM-ALL:Remote::1::; is entered.
RTRV-ALM-DS3
Description
This command causes Remote RMX-3200 to return all alarms designated with the
DS3 modifier during Remote RMX-3200 configuration. Points associated with class
DS3, which transmits digital signals at 44.736 Mbps over a T-3 facility, are generally
programmed with this modifier.
Format
RTRV-ALM-DS3:tid:[ aid ]:ctag::;
Parameters
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to input commands.
Each input command has a unique correlation tag. A response includes the
identical correlation tag to the one used for the corresponding input
command.
Remote RMX 09-01-27 14:00:02
M 1 COMPLD
/* RTRV-ALM-ALL:Remote::1:: */
"INPUT0_19,ENV:CR,MISC,NSA,09-27,09-48-45,,,:\"INPUT 0/19 CLOSE\",:,"
;
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to input commands.
Each input command has a unique correlation tag. A response includes the
identical correlation tag to the one used for the corresponding input
command.