Kentrox RMX-3200 - Rtrv-Alm-Oc3

Remote RMX-3200 Version 5.2x Configuration Guide
Remote RMX-3200 TL1 Commands: Default TL1 VNE Commands
28-9
Parameters
Examples
This example displays a normal response when command
RTRV-ALM-EQPT:Remote::1; is entered.
RTRV-ALM-OC3
Description
This command causes Remote RMX-3200 to return all alarms designated with the
OC3 modifier during Remote RMX-3200 configuration. Points associated with class
OC3, which is an optical fiber line that carries 155mbps, are generally programmed
with this modifier.
Format
RTRV-ALM-OC3:tid:[ aid ]::ctag;
Parameters
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to commands. Each
command has a unique correlation tag. A response includes the identical
correlation tag to the one used for the corresponding command.
Remote RMX 09-01-18 13:27:36
M 1 COMPLD
/* RTRV-ALM-EQPT:Remote::1:: */
"INPUT0_4,EQPT:CR,MISC,NSA,09-18,13-27-06,,,:\"INPUT 0/4 CLOSE\",:,"
;
tid
Defines the target identifier for a VNE on Remote RMX-3200.
aid
Defines the user name for a VNE on Remote RMX-3200.
ctag
Defines the correlation tag used to correlate responses to commands. Each
command has a unique correlation tag. A response includes the identical
correlation tag to the one used for the corresponding command.