Kentrox RMX-3200 - Page 242

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the SNMP Proxy: Configuring a Mediation SNMP Point Template
22-8
17. Configure the default polling state for points in this template as up.
config mediation snmp point-template ifEntryDef poll-default-state
up
18. (optional) Verify that the point template has been configured properly:
show mediation snmp point-template ifEntryDef
The command response similar to the following displays:
19. Save the configuration.
(Dub)>show mediation snmp point-template ifEntryDef
Name: ifEntryDef
Description: Entry in IfTable
Poll OID: .1.3.6.1.2.1.2.2.1.8.$(ifIndex)
State: down
Message: $(point) is down
Poll Value: 2
Severity: major
Trap OID: .1.3.6.1.6.3.1.1.5.3
Varbind Match: .1.3.6.1.2.1.2.2.1.1 = $(ifIndex)
State: up
Message: $(point) is up
Poll Value: 1
Severity: normal
Trap OID: .1.3.6.1.6.3.1.1.5.4
Varbind Match: .1.3.6.1.2.1.2.2.1.1 = $(ifIndex)
(Dub)>