Kentrox RMX-3200 - Page 244

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the SNMP Proxy: Configuring a Mediation SNMP NE Template
22-10
5. Configure NE template alarm1 with the following settings:
 NE template (existing) alarms
 parameter num
 value 1
config mediation snmp ne-template Template1 ne-template alarm1
alarms num 1
6. (optional) Verify that the NE template has been configured properly:
show mediation snmp ne-template Template1
The command response similar to the following displays:
7. Save the configuration.
(Dub)>show mediation snmp
(Dub) show mediation snmp>ne-templates Template1
Name: Template1
Description: Sample template
Event: runningConfigChange
Template: configChangeDef
Parameter: file = running-config
Point: modem
Template: ifEntryDef
Parameter: ifDescr = serial_modem
Template Reference: alarm1
Template: alarms
Parameter: num = 1
(Dub) show mediation snmp>