Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Technician Laptop Access for Remote RMX-3200: Assigning IP Addresses to Technician
Laptops
13-5
6. Configure the DHCP server IP address range as 10.10.10.7 to 10.10.10.12:
config dhcp-server subnet 10.10.10.0/24 range 10.10.10.7
10.10.10.12
Note: When the DHCP server assigns IP addresses to network devices, it
automatically starts with the highest value IP address in the range.
7. Configure the default time that a network device can keep an IP address assigned
by the DHCP server as
4500 seconds:
config dhcp-server subnet 10.10.10.0/24 default-lease 4500
8. Configure the maximum time that a network device can keep an IP address
assigned by the DHCP server as
6000 seconds:
config dhcp-server subnet 10.10.10.0/24 max-lease 6000
9. (optional) Verify that the DHCP server has been configured properly:
show dhcp-server
The command response similar to the following displays:
10. Save the configuration.
(Dub)>show dhcp-server
Admin State: enabled
Broadcast: disabled
Authority: disabled
Config file:
Note: User specified configuration files will override configured
DHCP server settings.
Interfaces:
bridge switch
Subnets:
10.10.10.0/24 range=10.10.10.7/10.10.10.12 router=10.10.10.1
default-lease=4500 max-lease=6000
DNS:
Hosts:
test MAC=00:00:00:00:00:00 IP=0.0.0.0
(Dub)>
To Next Page
Loading...
