Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Alarm Entries in the Central Alarm Table: Configuring an Alarm Entry for Ethernet Interface
MAC Security Violations
15-11
6. (optional) Verify that the alarm entry has been configured properly:
show alarm-entries name MACviolation
The command response appears similar to the following:
7. Save the configuration.
(Dub)>show alarm-entries name MACviolation
Name - MACviolation
State - normal
Current Message -
Description - MAC security violation
Nagging Interval - 0
Nagging Level - major
Trap - enabled
Raw - disabled
TL1 - disabled
TL1 AID -
TL1 Class - env
TL1 Affect - nsa
TL1 Type -
TL1NE - 1
Category - Equipment
NE Name - eth_3
Alarm Actions:
Severity Originator Trigger Message
------------------------------------------------------------------
major ethernet 3 mac-violat A MAC violation has
(Dub)>
To Next Page
Loading...
