Kentrox RMX-3200 - Page 215

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Relay Outputs: Configuring TL1 Commands to Control a Relay Output
20-5
8. (optional) Verify that action fanOnAction has been configured properly:
show actions fanOnAction
The command response similar to the following displays:
9. (optional) Verify that action
fanOffAction has been configured properly:
show actions fanOffAction
The command response similar to the following displays:
10. Save the configuration.
(Dub)>show actions fanOnAction
Action Name : fanOnAction
Action Description :
Event Name : fanOnCmd
Event Description :
Event Originator : tl1ne 2
Event Type : tl1cmd-rcvd fanOn
Response Name : fanOnResponse
Response Description :
Response Responder : output 0/1
Response Type : close
Response Parameters :
No parameters configured for this response.
(Dub)>
(Dub)>show actions fanOffAction
Action Name : fanOffAction
Action Description :
Event Name : fanOffCmd
Event Description :
Event Originator : tl1ne 2
Event Type : tl1cmd-rcvd fanOff
Response Name : fanOffResponse
Response Description :
Response Responder : output 0/1
Response Type : open
Response Parameters :
No parameters configured for this response.
(Dub)>