Remote RMX-3200 Version 5.2x Configuration Guide
Configuring TBOS Settings: Manually Configuring TBOS Display Points
21-12
7. (optional) Verify that the TBOS display point has been configured properly:
show tbos port serial 5 display 2 point 6
The command response similar to the following displays:
8. Save the configuration.
(Dub)>show tbos port serial 5 display 2 point 6
Number: 6
Name : tbos_5_2 6
Poll State: enabled
Severity : major
Alarm Message: Antennae Failure
Normal Message: tbos_5_2 6 Normal
Description : Antennae Failure
(Dub)>
To Next Page
