Kentrox RMX-3200 - Page 233

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring TBOS Settings: Configuring a TBOS Control Response with an Event
21-15
6. (optional) Verify that the action has been configured properly:
show actions systemPower
The command response similar to the following displays:
7. Save the configuration.
(Dub)>show actions systemPower
Action Name : systemPower
Action Description :
Event Name : powerFail
Event Description :
Event Originator : input 0/1
Event Type : close
Response Name : latchOn
Response Description : TBOS point 5 is latched on
Response Responder : tbos-control serial 5:2:5
Response Type : latch-on
Response Parameters :
No parameters configured for this response.
(Dub)>