Kentrox RMX-3200 - Page 258

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Jobs: Creating and Installing a Script Package
23-6
6. Using an FTP utility, do one of the following:
 Transfer exampleScript-1.0.0.pkg from the local workstation to the
pkgstage directory on Remote RMX-3200. Continue to step 7.
 Transfer exampleScript-1.0.0.pkg to the central FTP package server
default directory of
/, which contains all script packages. Continue to step 8.
7. At the main CLI prompt, install script package
exampleScript-1.0.0.pkg to
Remote RMX-3200:
config pkgs install name exampleScript
Continue to step 9.
8. At the main CLI prompt, install script package
exampleScript-1.0.0.pkg to
Remote RMX-3200 from the central FTP package server:
config pkgs install name exampleScript-1.0.0 fromserver
Important: To install a script package from a central FTP package server, you
need to configure a static route. For more information, refer to
Configuring Static Routes on page 10-1.
9. (optional) Verify that the script package has been installed properly:
show pkgs summary
The command response similar to the following displays:
Tip: To display the contents and attributes of script package examplescript,
enter
show pkgs name examplescript.
10. Save the configuration.

Note: Some jobs need to be restarted when the configuration changes, including:
 Battery Monitor (including the Battery Learner)
 Analog Monitor
(Dub)>show pkgs summary
Package Version
examplescript 1.0.0
(Dub)>