Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the Peripheral Management Subsystem: Configuring Remote RMX-3200 to Manage an
Expansion Peripheral
25-14
3. (optional) Verify that the expansion peripheral has been configured properly:
show peripherals unit 2
The output will look similar to the following:
Note: The output above shows the expansion peripheral in online mode, which
indicates that the peripheral is fully operational. Remote RMX-3200 has
established a management connection to it and it is fully functioning as
part of Remote RMX-3200. For more information on management states,
refer to section
Expansion Peripheral States on page 25-11.
4. Save the configuration.
(Dub) show>peripherals unit 2
Unit number: 2
Description:
Type: discrete-expansion
Admin state: Managed
Name: DEP-362A4C
IP address: 169.254.16.199
Oper state: Online
Manager name: AI101
Manager IP address: 10.34.64.101
Type: discrete-expansion
Model: B160.B
Firmware version: 1.10
Firmware build date: 2006-09-12,18:37:03.0,-04:00
Firmware build ID: 005
Serial number: 23028069
Manufacture date: 07/01/05
Stage2 bootloader version: 3.10
Stage2 bootloader build date: Thu Jul 6 13:52:11 EDT 2006
MAC address: 00:40:72:04:A0:A9
Discrete-I/O 2 subsystem: Online
(Dub) show>
To Next Page
Loading...
