Kentrox RMX-3200 - Page 311

Remote RMX-3200 Version 5.2x Configuration Guide
Using Configuration Wizards: Using the initsetup Wizard
26-5
11. (optional) Enter the desired SNMP v3 user settings when prompted. The following
settings are configurable:
 User name
 Authentication protocol
 Authentication pass phrase
 Privacy protocol
 Privacy passphrase
 Select (y/N) whether to add another user
12. (optional) Enter the desired SNMP community settings when prompted. The
following settings are configurable:
 The read-only community string
 The read-write community string
 The SNMP version
If SNMP v3 is selected, you will be prompted for the SNMP v3 user name.
You will then select the v3 desired authentication.
13. (optional) Enter the desired SNMP manager information when prompted. The
following settings are configurable:
 An IP address
 A community string for traps
 An SNMP version. If “SNMP version 3” or “SNMP version 3 inform requests”
is selected, then you will be prompted for the type of v3 authentication.
 Select (y/N) whether to add another SNMP manager
14. (optional) Enter the application package server information when prompted. The
following settings are configurable:
 An IP address
 A package directory on the server
 An FTP username and password
15. For the final step, select one of the following options when prompted:
 (a) Apply the settings to running-config
 (s) Save the commands to a patch configuration file
 (v) View the commands
 (c) Cancel
You are returned to the main CLI when complete.