Remote RMX-3200 Version 5.2x Configuration Guide
Getting Started: Setting Up the Initial Remote RMX-3200 Configuration
2-7
11. (optional) Verify that the user environment has been set up properly:
running-config
The command response displays similar to the following:
Notes: The preceding example was obtained using a supervisor profile, which
displays the entire configuration; users with management and status
profiles can view limited configuration data.
The -e preceding the encrypted text indicates that the password and
password confirmation have been encrypted.
12. Save the configuration. (Refer to
Saving the Running Configuration on page 4-2.)
(Dub)>running-config
# Product: Remote RMX
# Version: 3.30
# Created: 2010-11-22,12:25:08.0,-0800
# User: janedoe
# Stage2 Version: 4.06
config banner #
This is my banner.
\d
\t
#
config hostname Dub
config ip route default 10.40.0.1
config timeout 20
config users add janedoe supervisor -e$1$KwadE3g5$OzZeYQxk1CqLoyvm8/5pU. -e$1$Kw
adE3g5$OzZeYQxk1CqLoyvm8/5pU.
config interface bridge switch ip address 10.40.57.90/16
(Dub)>
To Next Page
Loading...
