Kentrox RMX-3200 - Page 384

Remote RMX-3200 Version 4.1x Configuration Guide
:
1-2
DAC
commands 27-4
safeguards 27-5
DHCP client 19-9
DHCP server
configuring 19-3
configuring a host 19-7
configuring subnet 19-5
Director SCD 11-3
drop and continue
commands 27-4
description 27-2
network 7-2
safeguards 27-5
E
Ethernet 6-4
controllers 6-2
interfaces 6-4
Point-to-Point Protocol 7-12
ports 1-4, 1-7, 1-10, 6-2, 6-4, 7-16
event
alarm associations 15-2
command example 12-4
components 12-4
configuring 12-7
correlation 14-2
description 12-2
event correlation
components 14-2
configuring 14-6
description 14-2
expression components 14-3
expression example 14-3
expansion modules 1-6
H
HDLC encapsulation 7-2, 7-9
help
accessing 2-2
HTTP 2-8
HTTPS 2-8
I
interface
asynchronous serial 6-5
bridge 6-4
definition 6-4
description 6-4
Ethernet 6-4
modem 6-5
OpenVPN 6-4
serial 6-5
J
job
configuring dynamic memory 23-13
configuring start times 23-12
configuring with a job property 23-8
configuring with a job task 23-10
description 23-2
script package and script 23-7
K
Kentrox Kickstart 2-2
L
laptop
access for Remote 13-1
assigning IP addresses 13-4
M
measurement table
entries
configuration examples 16-5
states 16-2
use with alarm table 16-3
use with event correlations 16-3
overview 16-2
mediation connections
description 17-2
N
Network Address Translation
configuring IPTables 13-6
enabling for laptop 13-6
network element sets
configuring 24-2
description of 24-2
instance 24-2
NTP 5-5
P
Package Manifest file 23-2
password
changing 3-4
entering 2-3, 2-4
strong 3-3
peripheral
RMB-1 1-8, 25-4
RMB-2 1-9, 25-5
RME-B64 1-7, 25-7
RME-E8 1-7, 25-8
RME-S8 1-7, 25-7
peripherals
administrative states 25-11
configuring a serial controller 25-19
configuring alarms 25-17
configuring discrete I/O points 25-15
configuring SiteBus devices 25-20
disconnecting a managed 25-22
expansion discovery 25-10
expansion states 25-11
management configuration 25-13
operation states 25-11
overview 1-6, 25-2
Point-to-Point Protocol over Ethernet 7-1
port
bridge CPU 7-16
capabilities 7-16
switched Ethernet 7-16
WAN 7-16
Port VLAN
overview 7-15
port VLAN
802.1Q tag 7-16
configuration 7-15
mode 7-16
overview 7-15
PPP encapsulation 7-7
PPPoE 7-1
configuring encapsulation settings 7-
13
high level configuration 7-12
overview 7-12
profile
configuring 1-1
creating custom 3-6
protocols 17-2
Python modules 23-2
R
relay output
configuring SNMP 20-6
configuring TL1 commands 20-4
description 20-2
open and close 20-8
Remote
features 1-2
front panel connectors 1-4
RMX 1-10
Remote Alarm Indications 27-3
responder 12-5
response
components 12-5
configuring 12-7
description 12-2
restore
network settings 4-5
RMX3200
overview 1-10
running configuration 4-2
running-config 2-7
S
script 23-3
components 23-2
Package Manifest file 23-2
Python modules 23-2
script package
configuring a job 23-7
creating and installing 23-5
SiteBus devices 25-20